Hi,I am trying to install Iplanet Application Server 6.5 on Solaris 8. Apache Web Server is installed on Mac OSX.Can i do a Webless installation by configuring Web Connector Plug-in on Mac? To elobarate, can i install Web Connector Plug-in on Mac OSX?Thanks venkatesh ...

I have just installed the Iplanet App Server 6.5. From the IA Admin Tool I am trying to log into the new application server (which I have tested and know exists) on the localhost, but I always get an error message - Cannot log into the server. Please check that your entries are correct. I have ...

I installed iPlanet app server 6.0sp4 on Solaris 2.8. I could define my port for kcs, kjs and kxs in userinput.log. How could I define my own port number for cxs and IIOP bridge? If you don't define it, the installer will use the default ones. Thanks.

I am installing Solaris 7 on an x86 machine with a Pentium 75 MHz processor and an 8 GB hard drive. The installations completes. The screen goes blank ,but the system never reboots. When I turn it off and then turn it back on all I get is a flashing cursor in the upper left corner of the ...

can somebody please answer this question as soon as possible.We have production licenses for iAS and I assume they are tied to IP addresses. Right/wrong?I have always problems on my dev box when the IP changes ...and I have my own way of getting around it(which may or may not be right for the ...

When I run the iAST (ksvradmin) I do not get a resource manager tab.

Hi,I am developing a web module with "Forte for Java" and deploying it to iPlanet AS 6 sp4. The module contains JSPs, classes and other files. Deployment process end fine. When I try to run the JSP in question I get the following in the kjs window:2001-12-06 05:30:56 - ERROR-the file ...

I have installed iAS 6.5. I've configured an Informix DataSource with JNDI name "jdbc/example".All parameters are correctly match but java exception throws when I try to getConnection(): The code: InitialContext iCtx = new InitialContext();DataSource source = ...

I have registered an informix DataSource with iAS Deployment tool. This is the deployment descriptor data:<ias-resource> <resource><jndi-name>jdbc/ibconta</jndi-name><jdbc><database-url>jdbc:informix-sqli://e450:1007/ibconta:INFORMIXSERVER=e450r ...

about version,document?Thank U

Hi, all,I installed IAS6.5 in window2000 professional with Iplanet Web Server 6.0 by ezSetup. After reboot the system and restart the web instance, I cannot run the sample application through http://<host>:<port>/fortune/fortune. The error is "GX Error (GX2GX)socket result code ...

the following install error :Your new directory server has been started.Created new Directory Server Start Slapd Starting Slapd server configuration.ERROR: Ldap authentication failed for url ldap://serverjfsun.software.centellki) Fatal Slapd Did not add Directory Server information to ...

I have this problem, the installation program will hang when it is searching for suitable SDK version.Pls help.

How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.<b>Procedure:</b>Run regedit -1. Go to HKEY_LOCAL_MACHINE\Software and delete iPlanet folder,2. Go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services delete the entries for : ...

hi,I have seen good response in this newsgroup. I believe i would getbenefitted.a)Well, how do we go about breaking a cluster? Exactly what are theentries that are stored in registry and in ldap for a cluster?b) Load balancing is among a group of servers right? So, If cluster isonly important ...

The following entry gets logged by ias whenever I try to load a particularjsp. What is nullglobal.xml? The file doesn't exist in the path specifiedin the stack-trace.[25/Jun/2001 14:38:31:2] error: Exception: SERVLET-run_failed: Failed inrunning template: /SeTool/Tool.jsp, ...

Dear all,I would like to implement iAS 6.0 sp2 on Solaris 8 with the followingclustering solution.For Machine A, two iAS instances are installed.iAS instance 1- Primary iAS for team AiAS instance 2- Backup iAS for team BLDAP- LDAP for team AFor Machine B, two iAS instances are installed too.iAS ...

Dear all,I would like to implement iAS 6.0 sp2 on Solaris 8 with the followingclustering solution.For Machine A, two iAS instances are installed.iAS instance 1- Primary iAS for team AiAS instance 2- Backup iAS for team BLDAP- LDAP for team AFor Machine B, two iAS instances are installed too.iAS ...

Dear all,I would like to implement iAS 6.0 sp2 on Solaris 8 with the followingclustering solution.For Machine A, two iAS instances are installed.iAS instance 1- Primary iAS for team AiAS instance 2- Backup iAS for team BLDAP- LDAP for team AFor Machine B, two iAS instances are installed too.iAS ...

Dear all,I would like to implement iAS 6.0 sp2 on Solaris 8 with the followingclusting solution.For Machine A, two iAS instances are installed.iAS instance 1- Primary iAS for team AiAS instance 2- Backup iAS for team BLDAP- LDAP for team A For Machine B, two iAS instances are installed too.iAS ...

Swaminathan(netscape)!! thankx for you comments to one of my previousquestions.I have a question regarding Sync Local being promoted to Sync Alternateor backup.If my kregedit tells meCluster nameMaxBackups=1 in my cluster name SyncServers list both my serversand when i am testing if my primary ...

Has anyone tried to install IAS on a Pentium 4 with Windows 2000?. Iknow that iPlanet does not support W2K but we have it running on P3s nowwhen we ignore the warning. The only difference is the chip. On the P4the server will not load and I get the following errors:-The application, httpd.exe ...

According to the admin doc of iplanet, primary server isthe "manager" for data sync, is there any impact onload balance when the iAS run as primary or backup?will the primary kxs get the request first and do dispatching?Thanks.Heng

According to the admin doc of iplanet, primary server isthe "manager" for data sync, is there any impact onload balance when the iAS run as primary or backup?will the primary kxs get the request first and do dispatching?Thanks.Heng

The documentation covers installing multiple instances of iAS but does notreally tell you which components to install.Do you need to install the Netscape Core components on all serversinstances, or can you get away by just installing the iAS server.I'm setting up a pair of servers pretty much ...

hi,Sorry for my inexperience in ias but I'm new at this. I'm trying toconfigure the ias cluster congifuration example (that one calledcluster-servlet with two ias and one ldap).I think I've followed all the steps of the installation correctly (I'vetried it several times), but the ias ...

is NAS capable of restarting itself upon certain conditions?we observed a couple of automatic restarts on our NAS cluster, but onlyrecently started having a closer look into them. in one recent case weobserved a 'runaway' kcs process spinning away for about 24 hours andthen NAS on that box ...

but, not just the one runaway process restarted but kxs, kjs processesand all kcs processes restarted. ?-t. #######################333333Looks like your kas restarted the process after it died.thomas fromherz wrote:> is NAS capable of restarting itself upon certain conditions?>> we ...

Hi, in an iPlanet cluster what is the difference between a sync alternateand a sync local other than the fact that sync alternates can be promotedwhile sync locals cannot?According to iPlanet documentation, sync alternates and sync locals behavesimilarly aside from sync alternates' ability to ...

Hi All,I have IAS and IWS on 2 machines and a DNS Server on one of themachines.During instaling i gave the domain name as a.b.c(let's say) and thescluster name as Cluster1.Now in my DNS Manager i have IP entry for A and B machines.In my KRegedit inbotth the machiens i can see the cluster name ...

Hi All,I have IAS and IWS on 2 machines and a DNS Server on one of themachines.During instaling i gave the domain name as a.b.c(let's say) and thescluster name as Cluster1.Now in my DNS Manager i have IP entry for A and B machines.In my KRegedit inbotth the machiens i can see the cluster name ...

Hi All,I have IAS and IWS on 2 machines and a DNS Server on one of themachines.During instaling i gave the domain name as a.b.c(let's say) and thescluster name as Cluster1.Now in my DNS Manager i have IP entry for A and B machines.In my KRegedit inbotth the machiens i can see the cluster name ...

We are setting up an HA WebApp based on iAS6sp2 and would like someclustering recommendations. Here is a basic setup:4 Solaris boxes (Solaris 8) configured like this:iWS1 has iPlanet WS 4.1sp? w/iAS WebConnectoriWS2 has iPlanet WS 4.1sp? w/iAS WebConnectoriAS1 has iPlanet iAS 6 Sp2iAS2 has ...

I have been doing some research on iPlanet performance tuning. In ourcurrent production environment (iAS6.0 SP1B, iWS4.1 SP2 on Solaris), sincewe don't use clustering there should be a couple of performance improvementswe can make immediately:1. Use lite sessions ...

Can someone show me what a properly configured cluster looks like inkregedit? I have just installed two instances of iAS on the same machine -just to prototype a cluster. My kregedit entries for each are identical:SOFTWARE/iPlanetApplication ...

When i try to enable the JMS via the script (jms/bin/jms_setup) onSolaris,the response is:Are you using the IBM MQ v5.1 as message provider [Y]:So i am not sure iAS6SP2 can support MQ5.2 or not?Thanks!Angus

When i try to enable the JMS via the script (jms/bin/jmssetup) onSolaris,the response is:Are you using the IBM MQ v5.1 as message provider [Y]:So i am not sure iAS6SP2 can support MQ5.2 or not?Thanks!Angus

The Java Developer's Guide of iAS 6.0 describes the Dynamic Reloadingfeature can be turn on/off by the registry entry: SYSTEM_JAVA\Versioning\Disable Would you mind let us know the full path of this entry? We cannot findit from kregedit.Thanks!Angus ...

Hi!I have configured two iAS in cluster and have installed severaldistributed applications with the sticky bit enabled.I try to configure the session-timeout in the application servers(through the kregedit tool) but doesn't function normally.I see that the cluster runs normally. I don't know ...

Hi,Is it possible to provide failover for servlets, keeping sessionpersistance, between 2 iAS in a cluster?What I trying to do is to use the iAS to provide me redundancy for anapplication that is 100% based on Servlets and JSP (no EJBs). Is thispossible?-- Marcelo MantaBarcelona Technology ...

Now I 'm using iws4.1 sp6 and iAS 6 sp1 revB . I met a problem thatsometime iws hang .I don't know this problem is came from so I solve thisproblem by kill httpd process and then start process again .I still want toknow with it and It's still be my problem until now .Do you have ...

iws4.1 problem

My client have a requirement to configure iAS6.0 SP2 to supportDB2Connect v7.2. As i know, i need to setup a JDBC driver and thencreate data-source for DB2Connect.Could you give me the procedure to do so?ThanksAngus

I would like to set up an envrionment have the following condition:one application server have two (ias_a, ias_b) iAS instance;one web server have two (iws_A, iws_B) web instance;the web sever is installed web connector on iws_A and point to ias_a.1: My question is how to make iws_A also point ...

Thanks for your recommend to upgrad to SP3. Now I still use Ias 6 SP1 revB.I config my production be cluster that have 2 machine.I met a problem thatsometime data in HttpSession didn't clear when I use commandsession.removeAttribute("data") sometime the data in HttpSession still existI don't ...

Hi,Pls help or give me some ideas on the problem I encounter, thx!1st of all, I followed all the procedures in the manual for setting up mycluster by using the GUI.The cluster was able to be created, but a message prompt "Lost connection tothe server, operation maybe fail!".As the cluster was ...

HiI am not sure of the origin of our problem in our architecture but it allstarted after installing ias6.0 sp1 for our HP unix box.For HP unix, the latest I guess is sp1 and we wanted to go with it fromias6.0.Our environment:We are running two unclustered HP unix boxes with two ias and iws in ...

HiI am just trying to test a few sample servlets as standalone...is there away to test these on ias without really going thru the hassle of creating a..war file for these independent standalone servelets? If yes, can anybodytell me the procedure.I am not able to find it in the admin or ...

All,I have installed my application as below1. Web Servers A, WebServer B (on DMZ) -iWS 4.1 SP82. Appln Server A, Appln Server B -iAS 6.0 SP2I have created a Cluster with Appln Server A as primary.When I access my application thru Web Server A, the performance is perfectlyok. However when I ...