With certain clients, it appears there is full functionality (load/unload modules, monitor, etc.) with the exception of acknowledging alarms. When an attempt is made to acknowledge an alarm, the error message is "...No response from agent."Any help is greatly appreciated!J. ...

OK, we have SunMC deployed in about 90% of our envirnoment. Where should I start for some sort of Notifictions on alerts? Like to start out with the small stuff. Filesystem sizes, host down, etcThanks!Steve

Anyone out there using the Halcyon EventAction module? Feedback? Looks like a great product. How expensive is it?Thanks!Steve

Hi, we are currently using SMC 3.0 (about to upgrade to version 3.5). I'm interested in using net-snmp so that I can get access to the SNMP data residing in SMC via various C++ applications.Can this be done without running a net-snmp agent or sub-agent? I would prefer to leave SMC as the only ...

In SOE,how to setup snmp config file (/etc/snmp/conf/snmpd.conf)to send trap to the-third party(no SMC intallation)on v880 or v480.who pls give me document for this on v880 or v480?

I Need to monitor the following entities....1)Linux Redhat AS 3.0 (Cpu,memory,disk,swap)2)3com 3300 switch (Runs rmon probe)3)3350 storage arrayCan SMC 3.5 monitor all of above or do I need a combination of SMC and Sun Storedge or any 3rd party tool.?

I'm having a problem with the agent on a specific machine, a V480 running Solaris 9. I have installed using the same image as a number of other machines, the only difference being post install I have changed the agent port from 161 to 4161 using es-config command and when the agent restarts it ...

Hi AllI've installed SMC and the hardware module for all systems other than the V890 is working. I've tried to search everywhere but cannot seem to find any modules for the V890. Any help appreciatedOmar

After installing SunMC v3.5 sucessfully on the server and various clients, I find that the hardware view for the V880's gives the following error:"Hardware Summary Information not available"I've verified the base and agent installations with es-validate.All other clients seem to display the ...

Anybody done this yet? Any problems? Do you have to upgrade all the agents as well or can you upgrade your server console and then gradually upgrade your agents ?

Hello,I'm testing SMC35u1. Installation went fine on server and one agent (U5). In the console, the U5 icon has this black splat with the following error message:Config Reader (Workgroup Server) tree prop Failed to Update.The agent log file contains the following lines:[000002cf 0061 ]errorMar ...

Hello,Did any one get to the bottom of the Alarm not appearing under SunMC? I have active alarms which do not appear under the Alarms Tab. I've tried all suggestions on this Forum, reseeding, moving agent files out the way, checking the info tab.One one system agent I get "Unable to get event ...

Anybody have an easy way to query the sunmc server and get it to list all its agents and their loaded modules and patch levels? There used to be a script in version 3 that did this, but it is no longer there in 3.5 and es-validate doesnt list all the agent info.Thanks

Hello,we are running SunMC 3.5up1 on Solaris 9. I installed a new server with Solaris 10 and the SunMC 3.5up1a Agent in the global zone. The agent starts fine, but I can't connect from SunMC server. I only got warnings on snmp-reports in agent.log.How can I debug this problem in a more ...

New to SMC. Have SMC 3.5 server running on a Sun-Fire-V210 with Solaris 9 OS.When I run es-validate -a <agent> -b <snmp agent port>, I get the following output.-Checking connecitivity to agent host mentioned with -a command line option-Connection to host <hostname> is alive. ...

I have solaris 6 installed.During the time of setup it accepts the Ip which I feed and is reachable.When installation completes and I reboot the system the system becomes unreachable and there is an infoLink Down Cable problem.If I run the command "ifconfig hme0 down" then the link light starts ...

So far, it appears that on two different architectures (E250/E450 versus V210) I have had to install different add-ons in order to get config reader working so that SunMC can monitor hardware (our ultimate goal). On the E250/E450 I had to include the "Workgroup Server" add-on. On my V210 the ...

Installed the smc 3.5 agent on a sun blade 100. Could create an object for the agent in the smc console but it was showing up as a file folder and only showing 2 tabs - info and module. After searching found that the Desktop add-on is needed on the server and the agent to manage a Sun Blade ...

I have a single netra T1 10x system that when added to sunmc diplays a "Netra t Config Reader Module Status system: Data acquisition error"Has anyone seen this? I need someone to point me in a direction to resolve this issue.

do anyone want to get a netra t1 105?is free, i'm can't deal with this solaris thingi setup my network with 9 server running my own DNS zone to webserver and streaming server, i buy the netra to use it as a dns server but this is next to imposible to do for me, windows is sooo easy.oh well i ...

I have an agent running and collecting data in a circular file.... history.log Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success. If I open the Data Collection Window in PRM I see a Yellow triangle beside the ...

Sorry if this is a simple question, but I have wracked my brains all day.And I have parsed this forum and the docs at docs.sun.com.Details: Running SMC 3.5u1I have a simple 'sh' script that performs some actions and returns zero (0)for success and minus one (-1) on failure. I have managed to ...

I have installed SMC 3.5 agent on a Sun Fire-V240 which is running on Solaris 9 and is connected to a T3I install the agent..but when it comes to give information of T3 it does not display any T3 I have made an entry in /etc/hosts/ and /etc/ethers fileWhat could be the ...

Hi all,I'am using SMC 3.5.1 to supervise non-SunMicrosystems boxes such as brocade switches or EMC FC4700 Service Processors with the ICMP Ping feature. It works nice ... only if the machine is down for at least 10 minutes. As a mater of fact the methods runs ping only every 10 minutes and ...

Is there an advantage of using SMC vs. Net Connect? They appear to provide the same information.

Following install of JASS hardening driver, the file scan module is not picking up on su root failures (that appear in the log). From the console the agent appears to be working properly but file scan is not alarming on the su failures. Anyone know which hardening effort might be suspect?

I need some help with setting some thresholds:1Hardware/Config Reader(High End Entry Servers)/Dimms Error Count: -1 Error Rate: -1error_count: an alarm will be generated if the count of errors goes above the number specified. error_rate: an alarm will be generated if the rate of errors ...

After successfull installation of SunMC I can not run setup program SUNWsymon/sbin/es-guisetup:# ./es-guisetupjava.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key SETUP_INVALID_LAYERS_HEADER_TEXTat ...

Hi,I am using Sun Management Center 3.0, Solaris 8, E450 box. While tryin to acknowledge any alarms I am getting the below error. "Exception occured while acknowledging alarm Error in action on - acknowledging alarm Agent is not responding"It would be great if anyone can shed some light in ...

I would like to know the procedure to disable the default read community string which is "public" and change create a new read community string using SMC 3.0

Is it possible to monitoring SunCluster nodes with the basic installation of SunMC 3.5?Regards,JP

We now use v65x servers here and there. Seems like SMC 3.5 is not available on Solaris for Intel. Am I mistaking here? Is there a way around this like another similar Sun product?Thanks.

Hello,I have SMC 3.5 server management servers. I need from this server forwarding events and messages to TIvoli Enterprise Console there si on oher server. Need installl any client on SMC sever? Where I can found MIB databese for solaris?Thank youFrantisek Nohejl

Hi,we are currently using SMC 3.0 under Solaris 8. We are only using the Advanced System Monitoring product. We have written a number of modules. We only use the SMC console for debugging. We use the Java RMI interface to display information we grab from the agent on a Java servlet. Some of ...

Hello, I am using SMC under Solaris 9.I can start SMC with no problems , however when I try and go to the management tools to, create concats, stripes and mirrors inStorage >DisksI get an error message box with the following:Attempt to get a list of all disks failed with an unexpected CIM ...

Hello,I'm installing a SUNMC agent onto a v880 and do not have the option to install the ELP config reader during the install. I have used the same install package to install to some V440s and V240s and those worked just fine.Any Ideas?

Have installed the SunMC agent on two E250's and cannot get a common config reader to load on either - it does not even show as an option. This appears to leave me without the ability to monitor hardware on these platforms.Will I get hardware alerts in this situation? Is there something I am ...

Some of the alarm descriptions in the Attribute Editor talk about info alarms, warning alarms, and error alarms. How do these correlate to the caution, alert, and critical actions?

Hello, I need to create some volumes in Solaris 9 on V240 with 2 HDD. The following is the table.volume name -mount point-size-user-group-modefn_cache0-n/a-100m-fnsw-fnusr-664How do I go about to archieve that? Thank you. I really appreciate help and guidence provided in the ...

Can someone tell me where are the new and old alarms placed (db, files?). I can't see any alarms in the console (cli shows me wierd things):[root@eliot:~]# es-cli> loginHost: eliotLogin: atomPassword:Login is successful.> getAlarmsThe command is currently running in the background. Run ...

A recent installation of 3.5.1a does not seem to be detecting the Blade 2000 properly. Workstation and Desktop, ELP, Netra Addon are selected. The agent shows up as UltraSPARC-III-+-) in the family name of the info tab, and only the Module Browser, and Info tab are available.Looking into it ...

Trying to configure sunmc agent on a 6800. A little unclear what I need to do. Need to configure a platform agent and agent on domain, bt not sure how to do this. Anyone get me started?thanks

I am using SMC 3.5.1 and I can get SNMP ping to work great but an ICMP does not respond even if I can ping from an xterm on the same box.Any Ideas?

Does anyone know if SMC 3.5 can be loaded on a V240 ? I don't see it listed as a supported platform.Thanks

Hi all,I am new to Sun MC. Has anyone got any clues on the error below while running the script es-setup?Regards,KelvinP.S. I have checked that the script /opt/SUNWsymon/lib/sbin/script-errors.sh is actually there, while the log /tmp/SunMCDBLogFiles/make.log cannot be found there. Output Screen ...

PRM on 3.5.1u1 will not generate png files for scheduled reports. However, when I run the report manually and post manually from the generated report, it works just fine. Any ideas on what I'm missing (directory ownership hasn't changed or anything like that)?

Hi all,I have installed the Sun MC server (base only) and agent on an E420R server. However, nothing is shown in "Hardware" of the module browser in Sun MC console. I have already installed these add-on products:ELP Config-Reader MonitoringWorkgroup Serverwhich are supposingly the config reader ...

When I run es-validate on my SunMC 3.5.1 server some of the services are not running and I can not figure out why.Trap-handler service Not RunningHardware serviceNot RunningCST service Not Running (not really concerned)The very strange thing is that the following plaform agents appear to be ...

How can you reinstall or remove the console component w/o wiping the entire sunmc install? Or maybe even trick either the es-install/guiinst to think its not installed so it can be reinstalled? I've tried to research this on the web and have not been able to find much. I've ran the es-inst, ...

Currently, I have SunMC 3.5 installed on my server and console, running on solaris 9. I installed 3.5 update 1a straight on a v40z server running solaris 10.i also make sure i seeded the correct secret key and customize the domain-config.x on the agent before restarting the agent process, but ...