HiI'm using Sun OS 5.8, using top command I have process with value 3048M in SIZE column, why ?, what is the normal value for SIZE column ?Why I have 11885M free in Memory ?Where is the 12G of memory ?load averages: 6.00, 6.19, 5.8012:30:13877 processes: 870 sleeping, 1 running, 6 on cpuCPU ...

I'm trying to get an action going for my V480. I can't find the Action tab on any object at all. Am I missing a module? I've installed version 3.5. I have the Workgroup Server add on installed and have two V480. I would like to e-mail a message on any hardware alarms. Can't figure it out. ...

greetings to all, I'am new to SMC and I'am installing it on my ultra 10 with 512 mb ram.The installation was ok but when I runs the gui setup after completing up to 50%it is suddenly getting stopped and redirecting me to some log file which saysDatabase setup fail :See the logfile ...

Dear all,I had an SunMC server+client on one machine running fine for weeks to experiment. Last week we changed IP address range in the data center and I followed the procedure to change the setup of SunMC to cope with the address change. First I ran "es-setup -F" to rerun the setup of SunMC ...

I would like to monitor CPU and Memory, but don't want to install a large application like Sun Managment Center. Can I install only a portion of this product? Ideally I would like an agent that populates an SNMP MIB with CPU and Memory statistics (very minimal requirements).What is the best ...

I am running SMC 3.0 Update 4. I would like to forward the traps received by the SMC to another station (runing NNM 6.41). I have done the steps outlined in the SMC FAQ and also tried the steps outlined in the thread 'Forwarding of traps'The following is what I have done./snmpset -h localhost ...

hiam testing SMC 3.5 and have installed three agents which are in the same subnet as the server (no firewalls). while one agent is working fine, but in the others, I cant open either the "Module Browser" or the "Module Manager" tabs in the console. But the other tabs like "logs" and "info" look ...

Hey all, I'm having trouble with the es-cli batch mode login. It seems that when you have a batch file (where commands are one per line, identical to the session based mode) one cannot run the 'login' command with any arguments that it will understand.I've been able to decipher (no thanks ...

Hi,Just finished SMC3.5 server and agent installtion on 15k 5 domains.It's working good.I installed SMC agent on SC0(System Controller).Discover manager detected properly.Here is my problem when i tried to load module for SC0 (Like PSDM,SC status etc) ....i am getting error ""Failed to load ...

Hi We have Sun Fire v880 Server and I would like to install SMC on this system as I have three CD's of SMC but how do I install it .any idea.Sukrut

I have an action setup to send an e-mail, via e-mail.sh, when a particular file reaches 90% full the e-mail is sent. Is there a setting to send e-mail every 10 minutes that the threshold is exceeded? or is once per threshold exceeded all you can do? It is SMC 3.0.

When I run the command ?(On a V120 with SMC 3.5 installed)--> /opt/SUNWsymon/sbin/es-run mib2x -f kernel-reader-mib.mib <--One of the lines of output is the following.齣so/org/dod/internet/private/enterprises/sun/prod/sunsymon/agent/modules/kerne ...

I would like to disable direct login to oracle, requiring users to login to their personal accounts and then su - oracle.... I would also like them to have to enter the oracle password. I tried setting up an account with setuid only, but they can still su with out having the password. ...

Hello,We currently are running SMC 2.1.1 and would like to move this from an Ultra 10 to a 250 with twin 300MHz. Am I correctly assuming that when I reinstall the server, and use the same hostname and IP as the server that all the agent configuration will remain.. In other words, does all agent ...

hii am testing SMC 3.5 server with SMC 3.0 agents. i get the following error when the agent starts:infoOct 07 02:42:22 agent loading module: Config-Reader4uwgwarning Oct 07 02:42:24 agent initialize - invalid dependency: system.total_mode_changesinfoOct 07 02:42:27 agent module ...

Is there a way to detect disk errors without parsing the /var/adm/messages file? SNMP? Some system level call? We are seeing disk failures in our product that come on slowly, usually generating errors and warnings about "Recoverable read error" or other before the failure. We would like to ...

Ultra 1 workstation hangs at the ok prompt, Restoring the System, Please Wait... cpr_reset_properties: Unable to open /.cpr_default on /sbus@lf, 0/espdma@e, 8400000/esp@e, 8800000/sd@0, 0a.cprboot: cannot read saved nvram info, please reboot.ok>Does anyone know what is wrong with the ...

How can I use email.sh to send emails as a user other than root.Root sends the email as <user>@<hostname><domainname>.com and for security reasons I need to remove the hostname from the senders email address if the email is being sent externally i.e. a paging bureau. I am ...

Hi,Not sure if this is the right forum to ask, BUT is there a command or a way to display the serial numberof a sun box without physically going to the box?Thanks,Siraj

Hi all,齝ould any one tell me where i can download OpenSSH from?Thanks.

We have a Solaris 9 Sunfire V120 with latest Sol 9 patches installed.The gui setup program freezes at about halfway through the progress bar and just sits there. You can cancel the install, and then even that hangs. End up having to kill all the processes. This is my second time around and have ...

Hello,I am in the process of installing SMC in our environment. I wanted to get as much information as I could about required patches for Solaris8 and 9. I have tried to install Performance Reporting Manager and get the message that patch 110973 must be installed on the system. When I try to ...

Got an issue and I hope I'm not the only one who has had this. I'm trying to install the server/console on a Blade 150 and I get the following once I try to run es-guisetupjava.lang.NullPointerExceptionat com.sun.symon.install.tools.XmlTool.queryXml(XmlTool.java:289)at ...

I am trying to install SMC 3.0 on Solaris 9, and was looking for a good "how to" paper to configure /install this software.Also, I am a newbie to Solaris so please excuse my lack of knowledge, but is Sun Management Center 3.0, the same as old Solaris Management Console ?Thanks ...

Is it posible power-on/power-off a SunFire 4800 using es-cli ?I have SMC 3.5 server working fine (sunfire platform agent, etc etc, installed) , and i can do this using GUI interfase, but i need automatize the task.Thanks for your help.Wilter.

I have 12k System controllers both with the same issue; a black splat on the Kernel Reader->System block. The log file indicates:warning Dec 15 03:01:49 agent data update error: .iso.org.dod.[...].kernelReader.load.uptimewarning Dec 15 03:01:49 agent data update error: Unable to get boot ...

Does anyone know what SunMC addon(s) to use for the SunFire V120 and Sunfire 280R servers?I'm not able to get any hardware information from either of these machine types.Thanks in advance.

Our firewall sits between our SunMC server/agents and our Windows PCs (SunMC console gui) I'd like to control what ports the SunMC server talks to the console on so that I don't have to have all ports open in our firewall.Has anyone changed what ports the server uses to talk to the consoles ...

I'm trying to figure out how to use Solaris Management Console to allow my users to ftp into the Trusted Solaris 8 box. It's suppose to be an FTP server. The account is there and the pasword is correct, but I get an Access Denied message and it kicks me to the ftp prompt.Why am I using TSol ...

After I exchanged the kernel-reader-simple module against the bigger kernel-reader the datacollect of PRM failed to get new history collections. The PRM Manager shows under menu 'Data Collection' the warning triangle about the last successfull datacollection and the taskreq.log shows error ...

Is there a way to globally load modules to all systems. Currently I go into each node and load modules. This gets tiresome. Is there any way to apply module changes to all systems in a domain? For instance, If I want to turn on Directory size monitoring for all systems. Any help is ...

Installtion of SUNMC3.5 on Sparc failed with error :" Failed to install SUNWesdb package" and then it won't allow me to go anyfuther.I tried to install number of times but I get same error during middle of installation.Regards,Nav

Hello,Is there an icon available for the V1280. I added one to our domain in SMC 3.5, but there isn't a icon that represents the V1280. It just shows it as a folder.Any help would be appreciated.

I am using SMC 3.0 on a Solaris 8 server. When I right click a server (object) in the MainConsole Window, one of my choices on the Drop Down box is "Alarm Action". This brings up the Alarm Action page, which I choose Actions next to the Host Down: line. This brings up the Action Selection page, ...

I ran es-backup in SunMC3.0, then ran es-uninst.es-inst SunMC3.5. Tried es-restore but failed.Is it possible to migrate the old version data?Thanks,

Hi all ,I have installed a Sun Mc , agents communicate with the smc console through a Firewall ,I need to know what it is the rules I must configure in firewall , mys questions are :1- What is the role of this following udp/snmp ports ?Server Event manager 163Server Topology manager 164Server ...

Hello friends:We have a little problem with Solaris Management Center after changing out hostname in Solaris9/Sparc.After change de hostname using sys-unconfig, we had to go to Console -> Preferences -> Home Toolbox location and change the hostname of our host. After doing this S.M.C. ...

Installing on test machine and receiving the following error on the web consoleError Requesting context of agent at ipaddr:164 snmp://ipaddr:164/mod/topology+view-23? hierarchychildI have the domain-config.x set as follows and do not understand why it is still looking for 164:Any assistance is ...

Our group is evaluating the SunMC currently. And as a part of the evaluation I was trying to use the SunMC client APIs. I am using Sun MC 3.5 APIs to communicate with 3.5 Sun MC server . I am the running the examples on the same hosts as SunMC server is running (Solaris 8) The examples I am ...

Getting the following error : Installation wizard can not proceed. Aborting installation. Trying to install on a Pentium 4 2.8 GhzInstalled new J2SDK 1.4.1I do not get any other information on the reason for the aborted installation.

I know there are config files that allow some silence during an installation, but the config file on setup does not. The setup will still prompt for keys and snmp setup. Is there a way around this. I noticed also that I can copy over the key cfg files from the server to the agent to make them ...

I am now receiving 3 sunfire 4800 machine from others, but I am afraid that someone hide some hack program in this machine, I will check crontab ,at and using sshd,tcp_wrapper to reinforce it ,Can you told me others ? Thanks !

We want to monitor a SAS application which supports the ARM (Application Response Measurement) API. Is there a way in SMC to interface with ARM?

Hi to all,I've got big problem!I would like to know if SUNSolaris 5.8 can integrate with SSH, like SUNSolaris 5.9.Is there a patch for this? bye byeAurora

Hello,I apologize if this question that I'm posting will sound a little bit dumb, or if it is located in the wrong forum. I was trying to find more information all arround the web site but I could not find anything. Does SunOS supports USB?If so, where can I find more information about ...

Hi All,I am not very sure as to whether this is the right forum to ask or not. I am currently in the process of evaluating a server for which I need the following details. I have a server which takes around 15 minutes to complete 25000 transactions. The config of the server is a 4CPU and a 8GB ...

Hi everyone,For the past few days the SUN database had been generating broadcast on our network.This broadcast impaired our network by causing packet loss which leads to failed calls to our network. Whenever we restarted the database,it runs normally for several hours but at close to 4 hours it ...

Hi all,can someone just explain to me in a layman language how to carry out a snoop test on my sun database.ThanksFortune.

Hi everybody,I've a problem!I'm working on SunSolaris 8 with openSSH, I need to implement secure FTP sessions, but if I do it trough SSH I can't limit users access only to FTP.Is possible open SFTP sessions without going trough SSH?CIAO!!Aurora

Hi everyone,SunMC Version: 3.5 (latest patch level) - both on server and the agent.I have a bunch of clustered servers, each with 2 public interfaces (using IPMP). The problem seems to be that when updating the configuration, the agent for some reason keeps responding on "the other" interface ...