Feel free to ask any problems with Solstice Enterprise Agents and subagents.I can help you.Arunmon

I've recently installed the latest versions of SEA and the SDK on my Solaris 8 box. Currently I am trying to implement a SNMP sub-agent.My problem is that the compilation of my mib results in a Bus Error(core dump) when running mibcodegen. The mib compiles without error using both mosy on a ...

I want to send a trap with some variables bindings.The _SSASendTrap3 used by default in the SEA sends scalar trap variables.I have found the following information:"4218931 New api for sending traps is added. Previous versions required all trap variables to be scalars. Trap variables can now be ...

Hello,I want to develop a SEM Application to handle notification for particular agent. I will be handling both confirmed and un-confirmed notification. If i get confirmed notification How i send the confirmed M-Event-Report response to agent? Kindly help me out in this regard.Thanks in ...

I'm running Solaris 8. Is the Solaris Management Console used for managing SNMP or do I need the Sun Management Center to do that.

Hello all,My subagent registers the subtree "private.enterprises.myenterprise.products.myagent", and all SNMP walks called on "myagent" or on the whole MIB tree produce the expected output.However, when calling a walk from "private", "enterprises", or "myenterprise", I get an "end of MIB".My ...

Hi AllHow to override value of sysObjectID on Sun Solstice Enterprise Master Agent ?Anil

Hi,I would like to know if Solstics x.25 version 9.2, OSI version 9.0 and FTAM version 9.0 are supported under Soalris 9 on Sparc.WHen i visit the web pages for the above products they only mention support for Solaris 7 and 8.Thanks,Manoj

Hello everybody,I woul like to send SNMP trap to TMN by snmp_trapsend, which shold be looks like example below. It has been captured by Ethereal.Has anybody know how to write parameters for this "big" trap ?Thank you for any hint in ...

Hello all, I think i will crywhen I do a snmpwalk to my solaris server,I have about 15 lignes,so i d like to install this mib > "kernel-reader-mib.mib" than i have downloaded from sun.comhow do I must install it plz help me.xavier

Per sun's doc, when we create mirror, stripe/concat objects, we need to create state database replicas, but when create raid5, the doc does not mention that we need create state database repicas at first, also, mirror, stripe/concat objects use slice, but raid5 use the whold disk.I wonder ...

The Solaris Volume Manager Administration guide identifies three types of RAID 0: stripe, concatenation, and concatenated stripe. What is a concatenated stripe?

We want to use Volume Manager to stripe our disks on our sunfire 440. The Solaris Volume Manager Administration Guide said, "use disks that are each on different controllers to increase the number of simultaneous reads and writes that can be preformed." How can I determine that disks are on ...

To setup stripe in the Solaris Volume Manager, we need to define an "interlace value." How do I determine this value?Thanks,

Hi all,I trying to find the ioctl support by Solaris 10 NIC drivers, am looking for info on iprb and bge drivers.any one has any info on these?Thanks and Regards

I've been tasked to do an audit of our environment and see which version of SNMP our servers are running so that we can look at where we are before we try to upgrade to SNMP Version 3. How do I check which version of SNMP a Solaris system is running?Thanks,T

Hi everybody,I instaled Solstice DiskSuite 4.2.1 on a Solaris 8. When a try to start the metatool a obtain an error message :# Initializing metatool... (myhost): /dev/md/admin: Initializing metatool: No such file or directoryCan anyone know why? Thanks in advance.Best ...

Dear all i want to monitor solaris 9 system using snmp . i have installed Solstice Enterprise snmp agent . mrtg is installed on one of machine . i have following question . where is solaris MIB file is located . . how can i get OIDs for CPU,Memory,Disk usage etc . i am trying to use Snmpwalk ...

Are the interface extensions that support 64 bit counters available anywhere in Solaris 10 03/05? I've been looking for things like the ifXTable and more specifically ifHCInOctets etc... but can't find them on the machine. I've tried some web searches and even sun site searches but can't ...

i want to extract physical disk vendor name ,model and all other information.which solaris APIs can be used to get this information.

We've had a minimal SMC configuration for a while, and I finally have time to get serious about it. But I'm having some trouble getting it to do what I need, so I could use some help. So far these are the issues that I haven't been able to resolve:First, I can't find a clear event related ...

HiI understand SMC can check on patches etc, what is this product like, what else can it do, because i understand it is not free?ThanksRgdsCharles

Hello I am a total solaris newbie....all sympathy appreciated.I have a sun fire V120 running solaris 8, connecting through an xterm on Windows 200I am trying to set up slices/partitions on my new disk, I am very unsure of running format commands etc. So I want to try to do it through the ...

Hi,I work in a PC running W2000pro and another with XPpro.Usualy I use MicroImages X server 2.0 or an old version of X-Win32 (3.0) to remote access at Unix environment.Do you have any suggestion for a better X emulator to work with Solaris?Thanks for your ...

I am a student and taking Solaris at the local community college. We have solaris 8 on Intel platform running SMC 1.2 and it works fine. I purchased a Ultra 1 and have Solaris 8 on it with SMC 2.?. When I start the program (smc &) it does brings up the console but i can not find any tools ...

Hi, I've a SUN server with private IP. It has a static NAT. Is it possible to define this server as an agent to SMC server on a real network. Any help would be greatly appreciated. Murat

Somebody can tell mw why SMC Console not run son Solaris 9 Platform ?There is any way to solve this problem ?Thank's in advance.

Hi, I need to find a way of providing a more user friendly audit log of command line activities than BSM. The script command generates the right level of details, but it's too easy to kill. Is there anyway I can make it more secure?ThanksStephen

Hi !I'm fighting a hard battle over here, trying to master a SUN Enterprice 450.Currently running SonOS 5.7 (solaris 7).Shortly I took over the resposibility for this machine. I found 10 disks (scsi, all of the same kind).But the system seems to just work with a few of them, but I not sure and ...

I'd like to use SMC to allow operators to modify passwords. Is this possible using the "basic" SMC installation? Or do I require other modules which allow me to do this?Thanks,-Mike-

Hi there,Is there a way to monitore A1000 disk stack with Sun Management Center?Also, does it worth waiting for version 3.5 which will be released on may 28?Thanks!Martin ChartrandSysAdmin

Hi everyone..Ok.. I have played around a little with SMC... but I have a few questions... 1 - When an alarm appears (hardware failure, CPU utilization too high, etc), is there a way to send an email or a page or it just puts a litte red check on the server name?2 - With the process monitoring ...

Does anyone know if there is a way to set up just one agent host, configure it exactly how you want it with modules, alarms, etc. and then duplicate that same config across many agents?

I am trying to install it but the server option is greyed out. Am I doing something wrong?Thanks,Sonny

After installing SMC 3.0 with platform update 4, I can add the host object in the SMC console however, when I try to modify the agent or add/remove a module I receive the "Insufiicient Security Privilege" message at the bootom of the window. I think It may be the security seed. When running ...

I'm configuring JASS (Security Toolkit) to run on newly jumpstarted machines and wanted to run the finish script: disable-snmp, but wasn't sure if SunMC needed to have these packages installed in order to run. I currently am at 3.0 but will be upgrading to 3.5. I have not run JASS on our ...

I installed the netra package on 2 Netra V100's. They both show an alarm on the LOM alert 3. What is this alarm? and how do I get it to go away. Its not very informative.Thanks,Sonny

Hai.. I am having solaris 7.0 O/S dont know how to boot do i need any boot disk for this just give me a clear idea ..................chandu.

I have installed SUN MC 3.5 server and agent on a group of machines. All machine communicate just fine except for 2 SunBlade 100s. The agents are running but the server doesn't collect data. When I run a 'discovery ' on the network for those nodes it finds the machines and labels them ...

I created an image using es-imagetool and I changed the port number as seen in my logs:Sun Management Center agents use SNMP Port 161 by defaultif port 161 is not in use. Port 161 could be in use on thedestination machine by the SNMP daemon snmpdx.Specify an Optional Port Number to assign the ...

With interest I read the topic about 'changing password'. OK I already visited halcyons site. But I`m afraid that SMC in general is weak at keeping scripts central or distribute them half or full automatic. The discription called script repository let me think that I may access scripts from ...

I installed SMC 3.0 Platform update 4 agent on a V480. Ran es-setup, it found the platform type V480 however, when I add the object in the console, the icon shows up as a blue folder or a non monitored object. Cant load modules and only has the simple kernel reader module. I also updated the ...

I have a v880 which the agent dies after a few minutes with this message:door_call(21, 0xFFBE1DA0)= 0door_call(21, 0xFFBE1F88)= 0door_call(21, 0xFFBE1F88)= 0door_call(21, 0xFFBE1B78)= 0door_call(21, 0xFFBE1C78)= 0door_call(21, 0xFFBE1C00)= 0door_call(21, 0xFFBE1D70)= 0Incurred fault #6, ...

Dear all,I am looking for the Developers Manual for SunMC 3.5. At the regular URL for documentation on SunMC 3.5 ( http://docs.sun.com/db/coll/810.2) I cannot find it. The one for 3.0 is available at http://docs.sun.com/db/coll/810.1. Can I use that one for a start or is 3.5 different internally ...

Dear,I loaded SunMC 3.5 Developer version on a V240. Going to "Details" for the node I see only the tabs called Info and Module Brower. I do not see the tabs called Alarms, Modules, Logs, etc. This means for instance I cannot add modules beyond the few that are installed by default in ...

The SMC FAQ for SNMP lists steps to take to forward traps to a 3rd party management application. The steps listed here: http://wwws.sun.com/software/solaris/sunmanagementcenter/faq/snmp.html#0q10 do not seem to be valid. Has anyone gotten this to work? After reading the Appendix of the DE ...

Due to the lack of Sun releasing MIBs for the platform modules, I have created them myself. They are very elementry MIBs that are useful really for just mapping OID numbers to names. They have been tested with the net-snmp tools. I don't have one of every piece of hardware, but they have been ...

Hello!During the installation when I set that the computer is not networked, everything (SMC) seems to work absolutely fine.But when I set the option that the computer is networked, The SMC (Solaris management Console) doesn;t startup. it says again and again that the server couldn't be found. ...

Hello!During the installation when I set that the computer is not networked, everything (SMC) seems to work absolutely fine.But when I set the option that the computer is networked, The SMC (Solaris management Console) doesn;t startup. it says again and again that the server couldn't be found. ...

I've installed the 3.5 agent on a V800, but the server (which is running 3.0, patch level 15) only show the "Blue folder of Death". The only tabs I have are Info and a Browser with quite a few undefined modules. Is there a patch/package I can apply to make the two play nice?