Hi,I have installed the Sun Management Center Console and an SEA on a remote box. However when I start up the console it prompts me for a logonid to the server. Am I missing something out here? If I put in the logonid of the box with the SEA, I get a warning message about a remote exception on ...

When the operator tries to acknowledge a generic trap, it works fine and a check-mark appears on the alarm.however, when the operator tries to acknowledge an enterprise specific trap, the Alarm Manager displays an error: "error while setting the attribute".Can anybody help me with this ...

I install Solstice Enterprise Agents SDK 1.0.3 for Solaris2.5.1/2.6 SPARC. In my small test mib file, I create two trap and using make parse to create the *.c and *.h file, in the agent_init() function I call the SSASendTrap to send one trap. I run the master agent and the subagent both with ...

When we try to do a copy and paste and the mouse is not exactly horizontal the system thinks we are trying to do a drag and drop. The drag and drop icon comes up and the system locks up. This is possibly a video card (standard configuration) problem, we are not sure. If anyone knows of a patch ...

Hi allPlease let me know how to run SolsticeThanks in advance

can anyone suggest where to find SUN Netra Specific mibs in the net..?If anyone can e-mail me them..it would be very helpful..my mail: senthilramaswamy@yahoo.com

I am configuring AdventNet SNMP agents to be statically invokedsub-agents by the Master Agent under Solaris 2.6/2.7. One question that has come up with some of the developers working with me on this regardingaccess control lists & communities is this:We already have communities and ACLs ...

Is there any documentation on the trap functions in trap.h? SSASendTrap is documented, but the header, reg_subtree.h, contains three different versions of it. Is this to represent v1, v2, and v3 traps?Thanks,Mark

Hi!On http://www.sun.com/sem/ you can read that SEM 4.0 is released.I need an SE Master Agent with SNMPv2 support.Is this Agent included in SEM 4.0? Where can I download SEM 4.0?What is the difference between SNMPv2 and SNMPv2c?Best regards,cAner

How I know oid value of the snmp variable when I work inside of get_<variable> or set_<variable> of this snmp variable.

Hello all!I am currently configuring one of our workstations, and would like to consolidate all user folders into the "/home" directory, but the "mkdir" command returns the error:mkdir: Failed to make directory "user"; Operation not applicableI also checked the permissions of the "home" folder, ...

I found some info in one of the FAQ pages that indicated SNMPv2c was in SEA but I have not found anything about SNMPv3. Can anyone tell me of any support or planned support for SNMPv3? We've got lots of agents that we now need to be able to support SNMPv3. Any suggestions? Is there a mapping ...

I have an agent to be ported to Solaris 8. How do I interoperate with the existing Solaris Master Agent.Thanks

Has anyone had any luck indexing tables by strings? When I make my call to the SNMP sub agent developed with the Sun toolkit, it gets the suffix properly, eg, 1.2.3.4 but never calls my "get_X" routine with that suffix. Instead, it returns a "noSuchName(2)" error and exits ... if it would call ...

I am trying to generate the snmpdemo to learn how to use the SEA SDK. I can create the snmpdemod just fine. I have created the .acl, .reg and .rscs files and moved them to /etc/snmp/conf. I then start snmpdx -d 4 and watch the output. When I snmpwalk from a differenct host as in:snmpwalk ...

How to get Solstice Admin Suite?It does not seem to be on the S8 distribution.I want to do a boot server and it seems I nee the host manager.

I have just recently started using Solstice Enterprise Agent's,a.k.a. SEA, (run-time environment along with it's SDK) and am having some trouble understanding how a developer is supposed to send application (custom software) traps to a sub-agent.I understand how the sub-agent sends traps to ...

when i do something like thissnmpwalk <ipadder> public enterprises.42.1000it core dumps (illegal instruction) after completing set_demoString()moreover i find the "pass" argument is -ve. the same thing happens if I callsnmpget <ipadder> public enterprises.42.1000.1.0Basically I have ...

node_find() returned demoOid with suffix!! get(): processing the variable demoOidagent_get(): ASN.1 type (0x6) is not NULL for node demoOidagent_get(): val is not NULL for node demoOidagent_get(): val_len is not 0 for node demoOidPDU:-version:0community:publictype: GET_RSP_MSG (0xa2)request ...

The entagents documents saysThis product is supported on the following platforms:Sparc (Solaris 2.4, 2.5, and 2.6) x86 (Solaris 2.4, 2.5, and 2.6) http://www.sun.com/software/entagents/docs/UGhtml/install_solaris.doc.html#1360so has anyone see the subagents working on solaris 7 and 8.if so pls ...

Snmpdevelopers,Using solaris 8 with patch 108869-12.snmpwalk core dumps the subagent any clues?Thanx in AdvanceTraces:<< received 41 bytes from localhost.32829PACKET:-30 27 02 01 00 04 06 70 75 62 6C 69 63 A1 1A 02 02 06 00 02 01 00 02 01 00 30 0E 30 0C 06 08 2B 06 01 04 01 2A 87 68 05 00 ...

Hi,I have a problem with defining trap variables as some table items. The subagent core-dumped when calling SSASendTrap. For examplemyTrap TRAP-TYPEENTERPRISE myCompanyVARIABLES { myTableEntryInteger } # a table item varDESCRITPION"this is a test trap."::= 2However, if the variables are ...

How do we add trap-recipients to the acl file?Any examples.

I have sucessfully installed and running Solstice X25 server onSUN. I configured it as DTE port andconnected to a DCE configured PAD with direct cable. I have configured PVC's on PAD as well asSUN. I wish to know how to access the PVCs on SUN. I also wish to know how to assign TCPport Nos. to ...

Hello, Anybody knows where can I get MIBs of Sun products (i.e. DiskSuite, etc...).TIA,-Jose Correa

Hi,I followed the documentation who said remove package SUNWsacom, SUNWsacom, SUNWsadmi and SUNWsasnm and reinstall everything with SUNWsasdk. I did it. After that I downloaded SEA package for SPARC 8.0 and could not found the packages I already removed.I did that because when I start my ...

Hi, I am investigating the SEA SNMP toolkit on Solaris x86 7 & 8. I applied the recommended patches on both of my systems. Everything worked fine except the traps. I modified the mib_demo.txt by adding a test trap definition:myTestTrap TRAP-TYPE ENTERPRISE demo VARIABLES { demoEntryInteger ...

hi all,i am not sure if this is the right place to post such a question, but i cannot find a more suitable thread.My question is i cannot telnet to my sun machine which is installed with solaris 8. During the telnet, the user name prompt shows up correctly. But after i type the user name, the ...

We are working on Sun E-5500 Sparc Server with Solstice Ent. Agent ver 1.1. We tried to install the Security Patch 106787-17. We could n't install the patch it says one or more patches are to be installed. Is it the right patch for SEA 1.1 or any other related patches to be installed.Kindly ...

What meaning is the message of the following outputted to /var/adm/messages? "齚 xxxx: [ID 481594 daemon.error] subagent registration failed"xxxx is my agent name. xxxx stops at the same time this message is outputted.I think SEA output the messge and stop my agent. Please teach me the cause and ...

Does anybody have a SEA subagent for monitoring file system/CPU/memory utilization?

Hi,Is description of public as a community name indispensable in snmpdx.acl?By execution of "/etc/init.d/init.snmpdx start", my agent is started from snmpdx.When deleting the following line in snmpdx.acl, it became impossible to start my agent."communities = public, private"In spite of defining ...

Can someone provide me with information on how to setup and configure an X25 Simulator using x25tool utility ?Thanks for your help

(1) I have useed "mibcodegen" to generate a code sample from "mib_demo.txt" which is in SUNWconn/sea/snmp/sample ;(2) I have never modify any code except "Makefile"(3) I use make to build a "snmpdemod" and reset snmpdemo.reg , snmpdemo.acl, snmpdemo.rsrc and snmpdemo.snmprelay;(4) Then I run ...

when I use "SUNWconn/sea/snmp/mib_demo.txt", Do I have to write SSAMain() by myself ?for example:ssamain(){ ... .... agent_init();......ssa_main_loop()}what's more ,ssa_main_loop() is writed by developer too.

Hi ,I would like to download and evaluate basic version of SUN MANAGEMENT 3.0 for E 250 server .My question is will it work for Solaris 9 .Also please can someone give the link from where I can download the software as the link on Sun is almost 1 Gb and the transfer rate painfully slow .Thanks ...

BIG PROBLEM.We have installed Solstice x25 9.2 on our E250 (SunOS 5.8).License installs correctly with a "license installation successful message" displayed upon completion of the license install. The license was checked and is correct for our host.I then launch x25tool (/opt/SUNWconn/x25/bin), ...

I am trying to develop a subagent using SUNWsasdk.I have a mib which uses SMIv2.The mibcodegen is not able to compile the file. I was able to compile the file through some commercial mib compiler - for the manager (not sun). So, the file seems to be ok. It gives an error - textual convention ...

Hi,I am new at this so I would appreciate your patience.I am currenty using SEA 1.0.3 on a Solaris 2.5.1 box.The problem I am having is when I do snmpwalk, I do not get the complete response.Turning the debugoption on snmpd to 4, I am seeing this error repeatedly.- snip -TRAP ...

Hi list,I'm struggling hard to implement an SNMP subagent using Solaris 8 SPARC and the SEA 1.0.3 SDK. I've applied patch 108869-18 to avoid difficulties.Querying the mib subtree controlled by my subagent works fine. Unfortunately, I can not make the master agent (snmpdx) to forward the traps ...

Hi,I'm having a problem with my SNMP subagent. If I leave it running overnight with no polling or trapping, the library will eventually exit with the message:select() failed [errno: Invalid argument(22)]... It doesn't signal or anything, just exits.My agent_select_info callback is as ...

Does SEA toolkit allow set operations on subagent managed objects?We have installed SEA on our system and running demo subagent. But our Manager is refusing to perform any set operations on any of the variables on our system saying it is read only.

As per the SEA documentation, trap destinations are specified through master agent configuration file and need to be set before starting master agent. We want add more managers dynamically i.e. after master and subagent are started and communicating with one manager.Does snmpdx provide any MIB ...

(1) I use Solstice Enterprise Agents 1.0.3 SNM(2) My subagent suddenly stop in middle night and some messages be write in /var/adm/messges Sep 4 02:40:53 cool snmpdx: select() failed [errno: Invalid argument(22)]Sep 4 02:40:53 cool snmpdx: select() failed [errno: Invalid argument(22)](3) I want ...

/var/adm/messages stop written recently. we are running solaris2.6. I noticed this happened after newsyslog rotated the messages file. In newsyslog, there is a line at end: kill -HUP `cat /etc/syslog.pid`. And syslogd is running. When I use logger to test, the test message was written to ...

When we try the snmp walk on the solaris system I get an error as snmpdx: [ID 102292 daemon.error] agent snmpd not respondingHowever snmpdx is seen in the process list.Please advise.

As a jackaroo, I could not get enough information for SEA1.0.3 from developer guide.I don't know how to send trap from subagent . And I think a small sample of using trap is the most helpfull things for me . Who could tell me how to do ? ( ; ; )Many thanks in advance.

Hi all,I am doing some R&D with Packaging in Solaris 5.6 for our project requirement.First i created one simple package, installed the package, tested it and removed. Then i am trying to create a package with the same files with extra depend file to test package dependencies, but it is ...

Running on Solaris 8 on a sparc. Dowloaded and installed SEA 1.0.3. Installed patch 108870-18And still the damn SNMPDEMO program crashes during a GET.Do I have to install Solaris patches too? (as the above one is only SNMP related)

Hi, My subagent is stopping anormaly after a few hours at the reception of an Unknown signal 15/16 or 17 ( respectively SIGTERM, SIGUSR1 and SIGUSR2).The call of the agent_end function is then done and the agent exits.Is there someone who know why a such signal is sent to the subagent ? Is it ...