I have an agent running and collecting data in a circular file.... history.log Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success. If I open the Data Collection Window in PRM I see a Yellow triangle beside the ...

Sorry if this is a simple question, but I have wracked my brains all day.And I have parsed this forum and the docs at docs.sun.com.Details: Running SMC 3.5u1I have a simple 'sh' script that performs some actions and returns zero (0)for success and minus one (-1) on failure. I have managed to ...

I have installed SMC 3.5 agent on a Sun Fire-V240 which is running on Solaris 9 and is connected to a T3I install the agent..but when it comes to give information of T3 it does not display any T3 I have made an entry in /etc/hosts/ and /etc/ethers fileWhat could be the ...

Hi all,I'am using SMC 3.5.1 to supervise non-SunMicrosystems boxes such as brocade switches or EMC FC4700 Service Processors with the ICMP Ping feature. It works nice ... only if the machine is down for at least 10 minutes. As a mater of fact the methods runs ping only every 10 minutes and ...

Is there an advantage of using SMC vs. Net Connect? They appear to provide the same information.

Following install of JASS hardening driver, the file scan module is not picking up on su root failures (that appear in the log). From the console the agent appears to be working properly but file scan is not alarming on the su failures. Anyone know which hardening effort might be suspect?

I need some help with setting some thresholds:1Hardware/Config Reader(High End Entry Servers)/Dimms Error Count: -1 Error Rate: -1error_count: an alarm will be generated if the count of errors goes above the number specified. error_rate: an alarm will be generated if the rate of errors ...

After successfull installation of SunMC I can not run setup program SUNWsymon/sbin/es-guisetup:# ./es-guisetupjava.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key SETUP_INVALID_LAYERS_HEADER_TEXTat ...

Hi,I am using Sun Management Center 3.0, Solaris 8, E450 box. While tryin to acknowledge any alarms I am getting the below error. "Exception occured while acknowledging alarm Error in action on - acknowledging alarm Agent is not responding"It would be great if anyone can shed some light in ...

I would like to know the procedure to disable the default read community string which is "public" and change create a new read community string using SMC 3.0

Is it possible to monitoring SunCluster nodes with the basic installation of SunMC 3.5?Regards,JP

We now use v65x servers here and there. Seems like SMC 3.5 is not available on Solaris for Intel. Am I mistaking here? Is there a way around this like another similar Sun product?Thanks.

Hello,I have SMC 3.5 server management servers. I need from this server forwarding events and messages to TIvoli Enterprise Console there si on oher server. Need installl any client on SMC sever? Where I can found MIB databese for solaris?Thank youFrantisek Nohejl

Hi,we are currently using SMC 3.0 under Solaris 8. We are only using the Advanced System Monitoring product. We have written a number of modules. We only use the SMC console for debugging. We use the Java RMI interface to display information we grab from the agent on a Java servlet. Some of ...

Hello, I am using SMC under Solaris 9.I can start SMC with no problems , however when I try and go to the management tools to, create concats, stripes and mirrors inStorage >DisksI get an error message box with the following:Attempt to get a list of all disks failed with an unexpected CIM ...

Hello,I'm installing a SUNMC agent onto a v880 and do not have the option to install the ELP config reader during the install. I have used the same install package to install to some V440s and V240s and those worked just fine.Any Ideas?

Have installed the SunMC agent on two E250's and cannot get a common config reader to load on either - it does not even show as an option. This appears to leave me without the ability to monitor hardware on these platforms.Will I get hardware alerts in this situation? Is there something I am ...

Some of the alarm descriptions in the Attribute Editor talk about info alarms, warning alarms, and error alarms. How do these correlate to the caution, alert, and critical actions?

Hello, I need to create some volumes in Solaris 9 on V240 with 2 HDD. The following is the table.volume name -mount point-size-user-group-modefn_cache0-n/a-100m-fnsw-fnusr-664How do I go about to archieve that? Thank you. I really appreciate help and guidence provided in the ...

Can someone tell me where are the new and old alarms placed (db, files?). I can't see any alarms in the console (cli shows me wierd things):[root@eliot:~]# es-cli> loginHost: eliotLogin: atomPassword:Login is successful.> getAlarmsThe command is currently running in the background. Run ...

A recent installation of 3.5.1a does not seem to be detecting the Blade 2000 properly. Workstation and Desktop, ELP, Netra Addon are selected. The agent shows up as UltraSPARC-III-+-) in the family name of the info tab, and only the Module Browser, and Info tab are available.Looking into it ...

Trying to configure sunmc agent on a 6800. A little unclear what I need to do. Need to configure a platform agent and agent on domain, bt not sure how to do this. Anyone get me started?thanks

I am using SMC 3.5.1 and I can get SNMP ping to work great but an ICMP does not respond even if I can ping from an xterm on the same box.Any Ideas?

Does anyone know if SMC 3.5 can be loaded on a V240 ? I don't see it listed as a supported platform.Thanks

Hi all,I am new to Sun MC. Has anyone got any clues on the error below while running the script es-setup?Regards,KelvinP.S. I have checked that the script /opt/SUNWsymon/lib/sbin/script-errors.sh is actually there, while the log /tmp/SunMCDBLogFiles/make.log cannot be found there. Output Screen ...

PRM on 3.5.1u1 will not generate png files for scheduled reports. However, when I run the report manually and post manually from the generated report, it works just fine. Any ideas on what I'm missing (directory ownership hasn't changed or anything like that)?

Hi all,I have installed the Sun MC server (base only) and agent on an E420R server. However, nothing is shown in "Hardware" of the module browser in Sun MC console. I have already installed these add-on products:ELP Config-Reader MonitoringWorkgroup Serverwhich are supposingly the config reader ...

When I run es-validate on my SunMC 3.5.1 server some of the services are not running and I can not figure out why.Trap-handler service Not RunningHardware serviceNot RunningCST service Not Running (not really concerned)The very strange thing is that the following plaform agents appear to be ...

How can you reinstall or remove the console component w/o wiping the entire sunmc install? Or maybe even trick either the es-install/guiinst to think its not installed so it can be reinstalled? I've tried to research this on the web and have not been able to find much. I've ran the es-inst, ...

Currently, I have SunMC 3.5 installed on my server and console, running on solaris 9. I installed 3.5 update 1a straight on a v40z server running solaris 10.i also make sure i seeded the correct secret key and customize the domain-config.x on the agent before restarting the agent process, but ...

After configuring several file scanning alerts, I am now unable to do so. After adding a new row to a file scanning "Scan Table", I get an "Insufficient Security Privilege" error after clicking "Apply". Why would I now not have the appropriate privileges to add alerts?

when trying to set values via mcp I get the following error Result: Error in SNMP set request Module List: process-table+solaris Script List: Deployment Options: Deploy to all destination hostsLoad on all destination hostsUse module parameters on source hostUse module schedule on destination ...

I have SMC running on two servers at two seperate sites - Each server monitors objects physically at its own site. Is there any way of introducing failover in the event of losing one of the SMC servers? (without cluster software) or can a server monitor the status of a remote server? If there ...

When I install agents I see add ons listed Patrol and Tivoli (I believe these were the two). Unfortunately, no HP OpenView. I was wondering what people are doing to get SunMC agent traps/support for HP OpenView. Using SunMC base agent and config reader for HW monitoring only.May also be adding ...

when i do Sun Ray server Configuration,show these info:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Configure Sun Ray Web Administration? ([y]/n)? yAn installation of Apache Web Server version 1.3 has beendetected at /etc/apache. Would you like to configure thisserver to host the Sun Ray Web ...

Is there a way to get disksuite (ODS) errors from the sunmc agent ? Is it possible to hook the mdlogd errors into sunmc ?Thanks.

Has anyone got a lead on a fix for this?# ./configdWGconfigdWG: Assertion failed [h_entries(node_byname) == total_node_cnt], configdWG.c, line 361Running Solaris 9 on a Ultra 10 workstation with SMC 3.5u1a. I see a couple of threads for it but no solution yet. Was wondering if someone had a ...

What is the best way for SunMC to detect LUN failovers?Thanks!

After "successfully" installing SMC via es-guiinst the process fails when attempting to use es-setup/es-guisetup. I get a message saying setup unsuccessful and pointing to a log (/var/opt/SUNWsymon/install/gui_setup_spinel.x) containg the following information:The Setup script will be executed ...

I want to notify users administrators by email about sun smc agents alerts , I know I can do it manually as described on the sunmc docs , but I ask a question if there is another way to deploy the script automatically for all agents (I have over 100 sun servers).Let me know how I can customise ...

Greetings,Storade 2.4 is happily displaying events in SunMC 3.5.1 and in an attempt to try something, I attempted to use the email.sh in Actions to alert me of "Action of any change". When I use email.sh for other actions, it works ok. Problem is that Storade events completely mess up email.sh. ...

Greetings,Before I put a call in with Sun, I thought I would find if anyone else has a similiar problem. I have SunMC 3.5.1 running on a number of platforms and generally it is quite stable. I do have a number of SunFire 1280's (Netra T-12 to SunMC) each with 3 system boards with 96 GB of RAM. ...

Hi all Managers ,I want to know if we can monitor HP Unix Boxs , Tru Unix 64 Boxs and Linux systems with sun management center ?Are there agents smc created for those platforms?Thanks

Greetings,I know there are some API's available that Openview and Tivoli can use for Remedy case creation. I was wondering if anyone has successfully created Remedy cases by using SunMC alone. With regard to managing literally thousands of disks and hundreds of systems, and the ongoing ...

I have installed the SMC agents on a number of system controllers. All was working fine - but now when I try and load modules / ack any alarms etc I get the following in the agent log filewarning August 5, 2005 1:00:36 PM UDP Processor#5: Sent to client: ...

I am I am fairly new to Solaris and have just started tracking system metrics with the SAR tool. I have encountered one issue with SAR, the output format is not that easy to import into a spreadsheet. Is there a way I can configure the SAR tool to format the data in a manner I can more readily ...

Greetings,In a previous lifetime, I managed one 6800 from the SunMC server, but now, I am trying to manage multiple 6800's from an agent system. To give you an idea, I have the SunMC server that can communicate with a SunMC agent system that has a private network to the system controllers. If ...

Hi Guys, Before I go about looking at this product, can anyone tell me if it is really worth the effort?Also, seeing as though Storedge 3510 and firmware update 4.11i appears to have http support, (not that I have got it working), is there any future plans to be able to use SunMC to manage them ...

Hi, Basically I am trying to set trap forwarding to a NNM on the network from sunMC 3.5 Update 1. I have followed all the directions in sunMC snmp FAQ and other threads on this forum but I am not able to set the trap destinations.I have added topology object and set the community as user name. ...

Can anybody help me to understand why this situation it's happening... Why the calling es-inst command path is different?, it look for /opt and it suppose to be /tmp that very extrange? Please let me know, Thanks...../agent-update.bin -s it-sun-smc -r 8080 -p smcagent sbin_archive ...