Hi All, I was looking for MIBs for getting CPU & Memory Usage from Solaris Machine ( Ver 2.8 ). I came across 2 mibs which provides this info. Those are HOST-RESOURCES-MIB and UCD-SNMP Mibs. But when I query the machine for these mibs, it is not returning any value. I would like to know ...

i want to extract physical disk vendor name ,model and all other information.which solaris APIs can be used to get this information.

Are the interface extensions that support 64 bit counters available anywhere in Solaris 10 03/05? I've been looking for things like the ifXTable and more specifically ifHCInOctets etc... but can't find them on the machine. I've tried some web searches and even sun site searches but can't ...

Dear all i want to monitor solaris 9 system using snmp . i have installed Solstice Enterprise snmp agent . mrtg is installed on one of machine . i have following question . where is solaris MIB file is located . . how can i get OIDs for CPU,Memory,Disk usage etc . i am trying to use Snmpwalk ...

Hi everybody,I instaled Solstice DiskSuite 4.2.1 on a Solaris 8. When a try to start the metatool a obtain an error message :# Initializing metatool... (myhost): /dev/md/admin: Initializing metatool: No such file or directoryCan anyone know why? Thanks in advance.Best ...

I've been tasked to do an audit of our environment and see which version of SNMP our servers are running so that we can look at where we are before we try to upgrade to SNMP Version 3. How do I check which version of SNMP a Solaris system is running?Thanks,T

Hi all,I trying to find the ioctl support by Solaris 10 NIC drivers, am looking for info on iprb and bge drivers.any one has any info on these?Thanks and Regards

To setup stripe in the Solaris Volume Manager, we need to define an "interlace value." How do I determine this value?Thanks,

We want to use Volume Manager to stripe our disks on our sunfire 440. The Solaris Volume Manager Administration Guide said, "use disks that are each on different controllers to increase the number of simultaneous reads and writes that can be preformed." How can I determine that disks are on ...

The Solaris Volume Manager Administration guide identifies three types of RAID 0: stripe, concatenation, and concatenated stripe. What is a concatenated stripe?

Per sun's doc, when we create mirror, stripe/concat objects, we need to create state database replicas, but when create raid5, the doc does not mention that we need create state database repicas at first, also, mirror, stripe/concat objects use slice, but raid5 use the whold disk.I wonder ...

Hello all, I think i will crywhen I do a snmpwalk to my solaris server,I have about 15 lignes,so i d like to install this mib > "kernel-reader-mib.mib" than i have downloaded from sun.comhow do I must install it plz help me.xavier

Hello everybody,I woul like to send SNMP trap to TMN by snmp_trapsend, which shold be looks like example below. It has been captured by Ethereal.Has anybody know how to write parameters for this "big" trap ?Thank you for any hint in ...

Hi,I would like to know if Solstics x.25 version 9.2, OSI version 9.0 and FTAM version 9.0 are supported under Soalris 9 on Sparc.WHen i visit the web pages for the above products they only mention support for Solaris 7 and 8.Thanks,Manoj

Hi AllHow to override value of sysObjectID on Sun Solstice Enterprise Master Agent ?Anil

Hello all,My subagent registers the subtree "private.enterprises.myenterprise.products.myagent", and all SNMP walks called on "myagent" or on the whole MIB tree produce the expected output.However, when calling a walk from "private", "enterprises", or "myenterprise", I get an "end of MIB".My ...

I'm running Solaris 8. Is the Solaris Management Console used for managing SNMP or do I need the Sun Management Center to do that.

Hello,I want to develop a SEM Application to handle notification for particular agent. I will be handling both confirmed and un-confirmed notification. If i get confirmed notification How i send the confirmed M-Event-Report response to agent? Kindly help me out in this regard.Thanks in ...

I want to send a trap with some variables bindings.The _SSASendTrap3 used by default in the SEA sends scalar trap variables.I have found the following information:"4218931 New api for sending traps is added. Previous versions required all trap variables to be scalars. Trap variables can now be ...

I've recently installed the latest versions of SEA and the SDK on my Solaris 8 box. Currently I am trying to implement a SNMP sub-agent.My problem is that the compilation of my mib results in a Bus Error(core dump) when running mibcodegen. The mib compiles without error using both mosy on a ...

Feel free to ask any problems with Solstice Enterprise Agents and subagents.I can help you.Arunmon

Hi, My subagent is stopping anormaly after a few hours at the reception of an Unknown signal 15/16 or 17 ( respectively SIGTERM, SIGUSR1 and SIGUSR2).The call of the agent_end function is then done and the agent exits.Is there someone who know why a such signal is sent to the subagent ? Is it ...

Running on Solaris 8 on a sparc. Dowloaded and installed SEA 1.0.3. Installed patch 108870-18And still the damn SNMPDEMO program crashes during a GET.Do I have to install Solaris patches too? (as the above one is only SNMP related)

Hi all,I am doing some R&D with Packaging in Solaris 5.6 for our project requirement.First i created one simple package, installed the package, tested it and removed. Then i am trying to create a package with the same files with extra depend file to test package dependencies, but it is ...

As a jackaroo, I could not get enough information for SEA1.0.3 from developer guide.I don't know how to send trap from subagent . And I think a small sample of using trap is the most helpfull things for me . Who could tell me how to do ? ( ; ; )Many thanks in advance.

When we try the snmp walk on the solaris system I get an error as snmpdx: [ID 102292 daemon.error] agent snmpd not respondingHowever snmpdx is seen in the process list.Please advise.

/var/adm/messages stop written recently. we are running solaris2.6. I noticed this happened after newsyslog rotated the messages file. In newsyslog, there is a line at end: kill -HUP `cat /etc/syslog.pid`. And syslogd is running. When I use logger to test, the test message was written to ...

(1) I use Solstice Enterprise Agents 1.0.3 SNM(2) My subagent suddenly stop in middle night and some messages be write in /var/adm/messges Sep 4 02:40:53 cool snmpdx: select() failed [errno: Invalid argument(22)]Sep 4 02:40:53 cool snmpdx: select() failed [errno: Invalid argument(22)](3) I want ...

As per the SEA documentation, trap destinations are specified through master agent configuration file and need to be set before starting master agent. We want add more managers dynamically i.e. after master and subagent are started and communicating with one manager.Does snmpdx provide any MIB ...

Does SEA toolkit allow set operations on subagent managed objects?We have installed SEA on our system and running demo subagent. But our Manager is refusing to perform any set operations on any of the variables on our system saying it is read only.

Hi,I'm having a problem with my SNMP subagent. If I leave it running overnight with no polling or trapping, the library will eventually exit with the message:select() failed [errno: Invalid argument(22)]... It doesn't signal or anything, just exits.My agent_select_info callback is as ...

Hi list,I'm struggling hard to implement an SNMP subagent using Solaris 8 SPARC and the SEA 1.0.3 SDK. I've applied patch 108869-18 to avoid difficulties.Querying the mib subtree controlled by my subagent works fine. Unfortunately, I can not make the master agent (snmpdx) to forward the traps ...

Hi,I am new at this so I would appreciate your patience.I am currenty using SEA 1.0.3 on a Solaris 2.5.1 box.The problem I am having is when I do snmpwalk, I do not get the complete response.Turning the debugoption on snmpd to 4, I am seeing this error repeatedly.- snip -TRAP ...

I am trying to develop a subagent using SUNWsasdk.I have a mib which uses SMIv2.The mibcodegen is not able to compile the file. I was able to compile the file through some commercial mib compiler - for the manager (not sun). So, the file seems to be ok. It gives an error - textual convention ...

BIG PROBLEM.We have installed Solstice x25 9.2 on our E250 (SunOS 5.8).License installs correctly with a "license installation successful message" displayed upon completion of the license install. The license was checked and is correct for our host.I then launch x25tool (/opt/SUNWconn/x25/bin), ...

Hi ,I would like to download and evaluate basic version of SUN MANAGEMENT 3.0 for E 250 server .My question is will it work for Solaris 9 .Also please can someone give the link from where I can download the software as the link on Sun is almost 1 Gb and the transfer rate painfully slow .Thanks ...

when I use "SUNWconn/sea/snmp/mib_demo.txt", Do I have to write SSAMain() by myself ?for example:ssamain(){ ... .... agent_init();......ssa_main_loop()}what's more ,ssa_main_loop() is writed by developer too.

(1) I have useed "mibcodegen" to generate a code sample from "mib_demo.txt" which is in SUNWconn/sea/snmp/sample ;(2) I have never modify any code except "Makefile"(3) I use make to build a "snmpdemod" and reset snmpdemo.reg , snmpdemo.acl, snmpdemo.rsrc and snmpdemo.snmprelay;(4) Then I run ...

Can someone provide me with information on how to setup and configure an X25 Simulator using x25tool utility ?Thanks for your help

Hi,Is description of public as a community name indispensable in snmpdx.acl?By execution of "/etc/init.d/init.snmpdx start", my agent is started from snmpdx.When deleting the following line in snmpdx.acl, it became impossible to start my agent."communities = public, private"In spite of defining ...

Does anybody have a SEA subagent for monitoring file system/CPU/memory utilization?

What meaning is the message of the following outputted to /var/adm/messages? "齚 xxxx: [ID 481594 daemon.error] subagent registration failed"xxxx is my agent name. xxxx stops at the same time this message is outputted.I think SEA output the messge and stop my agent. Please teach me the cause and ...

We are working on Sun E-5500 Sparc Server with Solstice Ent. Agent ver 1.1. We tried to install the Security Patch 106787-17. We could n't install the patch it says one or more patches are to be installed. Is it the right patch for SEA 1.1 or any other related patches to be installed.Kindly ...

hi all,i am not sure if this is the right place to post such a question, but i cannot find a more suitable thread.My question is i cannot telnet to my sun machine which is installed with solaris 8. During the telnet, the user name prompt shows up correctly. But after i type the user name, the ...

Hi, I am investigating the SEA SNMP toolkit on Solaris x86 7 & 8. I applied the recommended patches on both of my systems. Everything worked fine except the traps. I modified the mib_demo.txt by adding a test trap definition:myTestTrap TRAP-TYPE ENTERPRISE demo VARIABLES { demoEntryInteger ...

Hi,I followed the documentation who said remove package SUNWsacom, SUNWsacom, SUNWsadmi and SUNWsasnm and reinstall everything with SUNWsasdk. I did it. After that I downloaded SEA package for SPARC 8.0 and could not found the packages I already removed.I did that because when I start my ...

Hello, Anybody knows where can I get MIBs of Sun products (i.e. DiskSuite, etc...).TIA,-Jose Correa

I have sucessfully installed and running Solstice X25 server onSUN. I configured it as DTE port andconnected to a DCE configured PAD with direct cable. I have configured PVC's on PAD as well asSUN. I wish to know how to access the PVCs on SUN. I also wish to know how to assign TCPport Nos. to ...

How do we add trap-recipients to the acl file?Any examples.

Hi,I have a problem with defining trap variables as some table items. The subagent core-dumped when calling SSASendTrap. For examplemyTrap TRAP-TYPEENTERPRISE myCompanyVARIABLES { myTableEntryInteger } # a table item varDESCRITPION"this is a test trap."::= 2However, if the variables are ...